Phlush, Urine Prespray – 1 gal.
1 Gallon of Phlush (Urine Prespray)
Mix 6 oz. of Phlush to one gallon of water and spray at 200 sq. ft. per gallon on affected areas. Allow 5-10 minutes for chemical action. Proceed with detergent cleaning, rinse and force dry. If odor persists, inspect and treat sub-floor, padding, cushion or underlying material to remove source. Repeat Phlush application.
Hydro-Force sprayer or equivalent: mix 2.5 quarts in the 5 quart bottle for the 1 to 8 tip, 40 ounces for the 1 to 4 tip. Spray liberally, allow dwell time, proceed with cleaning, rinse and force dry. Always test in an inconspicuous area before use. HAZARD WARNING: Eye and skin irritant.
PRECAUTIONS: Wear eye and skin protection.
FIRST AID: Inhalation – remove to fresh air; Contact – flush with soap and water. Get medical help in all cases.
READ MATERIAL SAFETY DATA SHEET BEFORE USE.
KEEP OUT OF REACH OF CHILDREN.
DO NOT REUSE THIS CONTAINER.
Appearance: Clear, slightly yellow liquid
Specific Gravity: 1.02 (H20=1.0)
Dilution: 6 oz./gal. (1:20)
Freeze/Thaw: Will recover
Storage: Store in well closed containers away from open flame or heat